Scn 1200 24 Switching Power Supply 1200W 24v 50A,Single Output Parallel Ac Dc Power Supply,AC110V/220V Transformer To DC 24V

Scn 1200 24 Switching Power Supply 1200W 24v 50A,Single Output Parallel Ac Dc Power Supply,AC110V/220V Transformer To DC 24V
  • Продавец
  • Список ценUS $162.78piece
  • Продажная ценаUS $162.78piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,2 (196)

Oписание продукта

Welcome to our store!

we are special sales electronic products: proximity sensor, photoelectric sensor, switching power supply, solid state relay, terminal blocks, connector and so on.

-If you have any question or can\'t find the products,Please contact with us via Email at any time .

-If you needa large number of procurement, I will give you a good price discounts . please feel free contact with us


750W switching power supply adjustable output 0-12v 15v 27v 24v 36v 48v 50v 60v 72v 80v 110v 130V  INPUT AC220V TO DC 110V SMPS


other more output voltage, please contact us, we can customer-made.


Feature & Advantages:

Low price and high reliability

Universal AC input

High efficiency and low operation temperature

Soft-start current can reduce the AC input impact effectively

With short-circuit and overload protection

Compact size,light weight

100% full-load burn-in test

Install with EMI filter,minimum wave






  S-750-5  S-750-12  S-750-15  S-750-24  S-750-48
  DC Output voltage  5V  12V  15V  24V  48V
  Output voltage range(Note:2)  ±2%  ±1%  ±1%  ±1%  ±1%
  Rated output current  120a  62.5A  50A  31A  15.5A
  Output voltage range DC  0~5V  0~12V  0~15V  0~24V  0~48V
  Wave and noise(Note:3)  75mVp-p  120mVp-p  150mVp-p  240mVp-p  240mVp-p
  Inlet stability(Note:4)  ±0.5%  ±1%  ±1%  ±1%  ±1%
  Load stability(Note:5)  ±1%  ±0.5%  ±0.5%  ±0.5%  ±0.5%
  DC output power  400W  600W  600W  600W  600W
  Efficiency  80%  83%  84%  86%  87%
  AC input voltage range      190-240VAC  47-63Hz 
  Input current      5A/230V
  Power factor      0.65 - 0.75
  AC Inrush current      46A/230V
  Leakage current      <3.5mA/240VAC
  Overload protection      120%-150% Reset: auto recovery
  Over-voltage protection      120%-150%
  High-temperature protection      ERH3≥65°C~70°CFan on, ≤55°C~60°CFan off, ≥80°C~85°C, Cut off output (5-15V)~(24-48V)
  Temperature coefficient      ±0.03%/°C(0~50°C)
  Setup, rise, hold up time      1s, 100ms, 50ms
  Vibration      10~500Hz, 2G 10min,/1 cycle. Period for 60min, Each axes
  Withstand voltage      I/P-O/P:1.5KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVAC
  Isolation resistance      I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
  Working temperature and humidity      -10°C~+60°C, 10%~95%RH
  Store temperature and humidity      -20°C~+85°C, 10%~95%RH
  Overall dimension     260*105*65MM   (L*W*H)
  Weight      1.45Kgs
  Safety standards      GB4949,UL60950,EN60950
  EMC standards      According to GB9254 EN55022 EN55024 A level design



1. The parameter under the testing condition: 230VAC input, rated load, 25°C70% RH. Temperature.
2. Tolerance: Including setting tolerance, circuit stability and load stability. (Note:5).
3. Wave test: Adopting “A12” double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: the lowest voltage will be up to the highest voltage when the circuit overload.
5. Load stability test: The load is from 0% to 100%.
6. C3, 4 must be knocked down.





23imageimageship logoimage