2S 3S 4S Lipo Charger Battery Charging Port Balance Charger w/Battery Displayer Adapter Voltage Detector Meter For RC FPV Drone

2S 3S 4S Lipo Charger Battery Charging Port Balance Charger w/Battery Displayer Adapter Voltage Detector Meter For RC FPV Drone
  • Продавецgraceandflower.us
  • Список ценUS $20.92piece
  • Продажная ценаUS $20.92piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,3 (865)

Oписание продукта

 

 

Tracer4215BN MPPT solar charge controller with MT50 remote meter charge GEL AGM solar battery for solar cell panel control

 


   Tracer-3215BN

 

The New Tracer-4215BN controller features are listed below:

•12V/24V automatic identify or user-defined working voltage.

•Excellent heat dissipation. Using the integration of cast aluminum radiator shell, the controller can be natural cooling.

•Advanced maximum power point tracking technology to optimize using the solar system. Peak conversion efficiency is as high as 98%.

•Lock the MP point fast and the controller provides the industry’s highest tracking efficiency of 99%.

•Widely used, automatic recognize day or night.

•Several load methods are supported to convenient for different demand.

•Support 4 charging options: Sealed, Gel, Flooded and User-defined.

•Adopting temperature compensation and correcting the charging and discharging parameters automatically, improving the battery lifetime.

•Protection: over temperature, over charging, PV and load short, PV (battery) revered, over current protection.

•Actual power convenient and record function makes convenience to check the datum every day, every month and every year.

•RS-485 ports via the open standard Modbus protocol are supported to meet different occasion of demand.

•With supporting PC monitoring software and remote meter MT50, it is convenient to check the real-time data of controllers and set the parameters.

•Support firmware update.

 

Introduction:

The Tracer-4215BN  controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging.

 

The battery charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer-BN series controller has a RJ45 interface to allow communication with other accessory.

BN

 

1 – Heat Sink: Cast aluminum heat sink to dissipate controller heat.

2 – Charging LED Indicator: Indicate that the battery is charging or not.

3 – Battery LED Indicator: Show charging status.

4 – Key: Switch the load on/off in the manual mode and clear the part of faults.

5 –Temperature Sensor Port: Connect remote temperature sensor to measure ambient temperature and make temperature compensation for charging and discharging.

6 – Solar Module Terminals: Connect solar modules.

7 – Battery Terminals: Connect batteries.

8 – Load Terminals: Connect loads.

9 – RS-485 Port (RJ45 interface): Connect with PC or MT50 to monitor or update firmware.

 

Technical Specifications

Electrical Parameters                     

Description

Parameter

Nominal system voltage

12VDC / 24VDC Auto work

Rated charge current

Tracer4215BN   40A

Rated discharge current

Tracer4215BN   20A

Maximum battery voltage

32V

Max. solar input voltage

150VDC

Max. PV input power

Связанные категории