12V Infrared Light Lamp 15 LED Night Vision Metal Waterproof Fill Light For CCTV Security Accessories

12V Infrared Light Lamp 15 LED Night Vision Metal Waterproof Fill Light For CCTV Security Accessories
  • Продавецgraceandflower.us
  • Список ценUS $26.50piece
  • Продажная ценаUS $26.50piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,2 (268)

Oписание продукта

 

 
 
 
Certificate 

 certificate  

 GZN-3103-IR Product Overview

Copyright Announcement   

Trademark, name of software and hardware mentioned in this user manual are all belong to the corresponding company. Without our company\'s official permission, no organization or individual are allowed to copy or spread this user manual in any form by any means.

The contents of this manual will be changed without prior notice.

 

 

I. Specification

Model: GZN-3103-IR

Main Processor: High performance MCU

User Interface: RS485 port

LED Type: 16pcs high power IR LED

Wavelength: 850nm

Center Intensity: 150lux at 20meter

Beam Angle: 10 degree (standard), 30 degree, 45 degree (optional)

On/Off Switch: Environmental brightness detection

Strobe Interface (Default setting: Mode D):

            Mode D: Strobe frequency is 100Hz , duty cycle is adjustable and continuous working

      Mode H: Strobe frequency is in accordance with doubling pulse of camera, duty cycle is adjustable and continuous working (Duty cycle of Hikvision camera should be <50%)

RS485 Port: 1 RS485 Port, connect to PC

Parameter Setting: Support internal strobe light setting

Power Supply: AC165~220V

Power Consumption: Average≤20W,  Peak:40W

Best Distance: 10 to 20m, width 5 to 10m

Strobe Brightness: 1 to 4 adjustable

SYNC Interface: Strobe trigger input

Trigger Method: Low electrical level / Switching value

Lightning Protection: Common mode 4KV, Different mode 2KV

Housing Material: Aluminum+toughened glass

Cooling: Heating dissipating housing

Protection Level: IP66

Working Temperature: - 40 to + 60 degree celsius

Storage Temperature: - 40 to + 85 degree celsius

N.W. :  2.4kg

Product Size: 122*125*134mm

 

 

II. Hardware

Control signal port, Strobe trigger port and power wire.

Wiring definition

Control signal: 

Control signal

Strobe Trigger: 

Strobe Trigger

The principle diagram of interface

The principle diagram of interface

Connection between camera and strobe light

Connection between camera and strobe light

Wiring diagram between camera and strobe light

Wiring diagram between camera and strobe light

Software

The software control program is used to setting up configuration parameters of our company\'s LED strobe light. Through RS485 it is able to control and set up parameters of maximum 16pcs online LED Strobe lights easily.

Support System

Windows 32-bit operating system; i.e: Win2000/XP etc.

Software Interface

Software Interface

1. Port: Make sure the connection between PC and strobe light are well connected, and then click the drop-down list to choose the right Serial port of Strobe light, and then click “open serial port”. 

Note: A. When click the Open Serial Port, the Strobe Switch will normally switch to OFF automatically. The Operate Log is showing the operating status. If the serial port is opened normally, now you can set up other parameter. If the serial port is not opened, please click Close Serial Port , check if all cables are connected correctly and then re-open the port again.

         B. After all parameter set up are ready, set Strobe Switch to ON and the strobe light will flash and start working.

2. Set Up Address: Click the drop-down list to change the current selected strobe light address, after change successfully the new address will be writing in.

Note: Address cannot be reduplicated as the current on-line strobe light.

3. Strobe Mode: Select mode D or Mode H for adapting to different kind of cameras. 

    Mode D: Set Strobe Switch ON, the product begins strobe according to camera video sync. signal.

    Mode H: Set Strobe Switch ON, the product will not strobe until camera sent pulse trigger signal.

4. Strobe Switch: Click ON: Strobe all the time. Click OFF: No strobe. Click AUTO Strobe will be controlled by Day/Night switch sensor.

Note: Only when the Strobe Switch set to OFF, other parameter setting can be done. If you want to modify other setting, please set it OFF at first.

5. Strobe Brightness: Click the drop-down list to change the brightness of strobe, level 1 to 4. 

6. Trigger Flash: Click the trigger flash button, the strobe light will strobe/flash one time according to the current setting of brightness.

7. Operate log To make sure every process of the setting is successful, please check the updated data on operate log after every process:

    A. If the process is successful, the operate log will show “Response Data” with hexadecimal numbers.

   [ 2015-01-18 14:50:42 453 ] Sent Data to Device: FD0005010006

   [ 2015-01-18 14:50:42 656 ] Response Data: FD 00 05 01 00 06

    B. If the process is failed, the operate log will show “Sent Data to Device” with hexadecimal numbers without “Response Data”.

   2015-01-18 14:49:58 437 ] Sent Data to Device: FD0FFE00000D

   [ 2015-01-18 14:49:58 640 Sent Data to Device: FD00FD0000FD

 

Warning!!

1) The same RS485 port can\'t connect to two strobe light with same address, otherwise it may cause hardware damage.

2) The power wire should connect to ground wire, otherwise may cause electrical shock.

 

 

III. Dimension:

 

 

 

 

 

 

High Intensity Light Complement Manufacturer

 

Must Read


Limit Warranty


Buy the product( s)  from "Scene",  you agree to terms and conditions of warranties and policies as below:

1. All equipments carry a 24 months replacement/repair warranty from date of purchase against defects in workmanship and materials.
A. Please contact us within 14 days upon item received and provide its status image.
B. Please contact us for a RMA form and return item for replacement or refund.
C. All returns/ exchanges must be in brand new & resalable condition and in original packing.
D. Replacement or full refund will be provided upon item arrival. If we on longer carry item that returned due to a manufactures defect, we will send a working comparable new item of our choice.
E. We will cover return postage.

2. "Scene" is not responsible for improper installation, modificatio, voltage spikes, misuse of products, chromatic aberration problem or the item no measuring up to expectations, Corrosion due to improper care of salt spray in snow or beach areas is not covered.
A. Pls contact us within 14 days upon item received.
B. All returns/exchanges must be in brand new & resalable condition and in original packing.
C. Buyer must pay all postage cost of return and replacement.
D. Replacement or full refund will be provided upon item arrival. If we on longer carry item that returned due to a manufactures defect, we will send a working comparable new item of our choice.

3. Shipping and handling fees are non-refundable for all returned items.

4. Purchaser assumes all liability for using these products in compliance with all applicabl state and federeal laws regarding surreptitious audio and vedio recording or monitoring.

Payments and shipping Information
1. Normally Parcels will be shipped from China via Express air. The tracking number will E-mail to you when item sent.  Pls contact the sales before paying about the shippment way and freight fee, particularly the country Russia, The Republic of Belarus, Angola, Brazil, Latvia, Azerbaijan, Turkey, Ukraine and so on.
2. Payment by Escrow only, Parcels will shipped out within 3-5 workdays after received the payment and delivery to your address.
3. We can not delivery to P.O. Box numbers. Pls provide physical address & contact phone number.
4. To avoid delays caused by delivery failure, please ensure to send your detailed address and full name to us, please specify a note while you making the payment on Escrow. We will not responsible for extra shipment and delivery cost which is caused by a wrong or undeliveralbe address was supplied.

Combine shipping Discounts
The shipping cost are include packing material, handling charge and shipping cost. Need pay all items shipping.


Customs Notice
Please note you must borne for any additional charges, import duties or taxes in case it is still required from the customs in your Country.